Zamma Vinyl Overlap Stair Nose Molding (94 in.) Review (2026)
By Nate Sawyer, Editor · Updated July 2026
DIYPicks is reader-supported. As an Amazon Associate and affiliate of home-improvement retailers, we may earn a commission when you buy through links on our site — at no extra cost to you. This never affects our recommendations.
- Stairs
- Luxury vinyl plank
- Overlap tread
The forgiving alternative to a flush stair nose: an overlap profile that laps over the cut edge of a floating LVP or laminate tread, hiding the plank end and expansion gap in one color-matched piece. It installs more easily than a flush nose because the tread need not butt perfectly, at the cost of a small raised lip instead of a seamless step line.
Pros
- Overlap lip laps over the cut edge of a floating LVP tread, hiding the plank end and expansion gap in one piece
- Color-matched to Zamma's large range of vinyl and laminate lines, so it blends with common floors
- More forgiving to install than a flush nose because the tread plank does not have to butt perfectly to it
Cons
- The overlapping lip creates a small raised edge instead of the seamless flush look
- Only fits stair tread edges, so it is useless as a floor-to-floor transition
- At about $42 for a 94 in stick, a full staircase adds up quickly
Specifications
| Type | Overlap stair nose (laps over tread edge) |
|---|---|
| Material | Vinyl-wrapped rigid core |
| Length | 94 in |
| Profile | 1 in thick x 2-1/2 in wide (3/4 x 2-1/8 also sold) |
| Joins | The front edge of a stair tread over a floating floor |
| Install | Adhesive or nail over the tread edge |
Frequently Asked Questions
- How do you install a Zamma overlap stair nose?
- It laps over the cut front edge of the stair tread and fastens with adhesive or nails over that edge. Because the lip overlaps, the tread plank does not have to butt perfectly against it, which makes it considerably more forgiving to fit than a flush nose.
- Why choose an overlap stair nose over a flush one?
- It hides two things in one piece: the raw cut end of the floating LVP plank and the expansion gap that plank needs. With a flush nose both have to be cut to a tight tolerance. The trade-off is appearance - the overlapping lip creates a small raised edge rather than a seamless flush transition.
- Will it match my floor?
- Zamma color-matches to a large range of vinyl and laminate lines, so most common floors have a corresponding stick. Match to the exact floor line rather than by eye, since near-matches are more obvious on a stair nose than anywhere else in the room.
- What does a staircase cost in stair nose?
- About $42 per 94 in piece, and a full staircase adds up quickly - price the whole flight before committing to a floor. Note it only fits stair tread edges and is not usable as a floor-to-floor transition, so it is not an interchangeable moulding.