Sherwin-Williams ProClassic Waterborne Interior Acrylic Enamel Review (2026)
By Nate Sawyer, Editor · Updated July 2026
DIYPicks is reader-supported. As an Amazon Associate and affiliate of home-improvement retailers, we may earn a commission when you buy through links on our site — at no extra cost to you. This never affects our recommendations.
4.5$82Approx per gallon at Sherwin-Williams stores; commonly $64-$91 depending on sale and account pricing.Check Price on Amazon →
- Trim and molding
- Interior doors
- Cabinets
- Smooth brushed finishes
A widely available waterborne acrylic enamel that gives trim, doors, and cabinets a smooth, leveled finish with easy water cleanup. It is a dependable pick for DIYers who want a refined brushed look and quality tint options from a Sherwin-Williams store, provided the higher price fits the budget.
Pros
- Self-levels to a smooth, professional-looking finish that minimizes visible brush strokes
- Water cleanup and low odor with the hard-wearing look of a traditional trim enamel
- Widely stocked at Sherwin-Williams stores with strong color and tint availability
Cons
- Premium price is higher than most big-box waterborne enamels
- Full hardness cure takes days, so trim and doors stay soft to knocks early on
- Not as blocking-resistant early as PPG Break-Through, so avoid closing doors too soon
Specifications
| type | Waterborne acrylic enamel |
|---|---|
| sheen | Semi-gloss (satin and gloss also available) |
| coverage | About 400 sq ft per gallon |
| dryToTouch | About 1 hour |
| recoat | About 4 hours |
| levelingAdditive | Compatible with Floetrol for extended open time |
| application | Brush, roller, or spray |
| cleanup | Soap and water |
Frequently Asked Questions
- Does Sherwin-Williams ProClassic leave brush marks?
- It is specifically formulated not to - it self-levels to a smooth, professional-looking finish that minimizes visible strokes, which is the main reason people pay for it on trim and doors. It is also compatible with Floetrol if you need to extend the open time further in warm conditions.
- How long before ProClassic is fully hard?
- Dry to touch in about an hour and recoat at about 4 hours, but full hardness takes days. Trim and doors stay soft to knocks in that window, so keep furniture and hardware away from freshly painted surfaces longer than the recoat time suggests.
- Can you close a freshly painted door?
- Not soon. ProClassic is not as blocking-resistant early as PPG Break-Through, so a door closed too soon can stick to the jamb. If a same-day return to service matters more than the levelled finish, that is the trade-off to weigh.
- What does ProClassic cost and how far does it go?
- Around $82 a gallon, commonly $64-91 depending on sale and account pricing, covering about 400 sq ft per gallon. That is a premium over most big-box waterborne enamels, offset by wide stocking and strong tint availability at Sherwin-Williams stores.