PPG Break-Through! Interior/Exterior Door, Trim and Cabinet Paint Review (2026)
By Nate Sawyer, Editor · Updated July 2026
DIYPicks is reader-supported. As an Amazon Associate and affiliate of home-improvement retailers, we may earn a commission when you buy through links on our site — at no extra cost to you. This never affects our recommendations.
4.4$56.98Approx per gallon (V62-510 Base 1) at The Home Depot; quarts around $23.Check Price on Amazon →
- Interior doors
- High traffic trim
- Cabinets and shelving
- Fast turnaround projects
A low-VOC waterborne enamel engineered for doors, trim, and cabinets where durability and speed matter. Its fast dry and standout block resistance make it ideal for interior doors that must be rehung and used the same day, and it grips tricky surfaces most enamels struggle with.
Pros
- Very fast dry-to-touch (15-20 min) and 1-hour recoat let you finish doors in a single day
- Outstanding early block resistance means painted doors and windows resist sticking soon after use
- Adheres to difficult substrates including vinyl, galvanized steel, and architectural plastics
Cons
- Fast set time shortens the wet-edge window, so brush marks can appear if you overwork it
- Semi-gloss shows surface imperfections, demanding careful sanding and prep on old doors
- Base and tinted versions vary in hide; deep colors may need extra coats over dark surfaces
Specifications
| type | Waterborne acrylic enamel, low VOC |
|---|---|
| sheen | Semi-gloss (satin and gloss also available) |
| coverage | About 400 sq ft per gallon |
| dryToTouch | 15-20 minutes |
| recoat | About 1 hour |
| blockResistance | Strong early block resistance |
| application | Brush, roller, or spray |
| cleanup | Soap and water |
Frequently Asked Questions
- How fast does PPG Break-Through dry?
- Dry to touch in 15-20 minutes with about a 1-hour recoat, which genuinely lets you finish a set of doors in a single day. That speed is the main reason to choose it over a conventional trim enamel.
- What is block resistance and why does it matter for doors?
- Blocking is when a painted door sticks to its jamb or a window sticks in its frame after closing. Break-Through has outstanding early block resistance, so painted doors and windows can go back into service soon after painting instead of being propped open for days.
- Will it stick to vinyl or metal?
- Yes. It adheres to difficult substrates including vinyl, galvanized steel and architectural plastics, which is unusual for a waterborne enamel and widens what you can repaint without a separate bonding primer.
- What is the downside of the fast dry time?
- A short wet-edge window. If you overwork a section it will show brush marks, so work in planned sections and do not go back over setting paint. The semi-gloss sheen also highlights surface imperfections, so an old door needs careful sanding first, and deep tinted colors may need extra coats over a dark surface. Coverage is about 400 sq ft per gallon at roughly $57.