DIYPicks

Latex-ite Airport Grade+ Driveway Filler Sealer Review (2026)

By Nate Sawyer, Editor ยท Updated July 2026

DIYPicks is reader-supported. As an Amazon Associate and affiliate of home-improvement retailers, we may earn a commission when you buy through links on our site โ€” at no extra cost to you. This never affects our recommendations.

4.5$42per 4.75-gal pailCheck Price on Amazon โ†’

A commercial-strength, polymer-modified asphalt emulsion that is one of the most widely stocked DIY blacktop sealers. Its thick body fills hairline cracks and restores a deep flat-black look, but it is strictly for asphalt and demands a dry, warm application window.

Pros

  • Heaviest-bodied consumer Latex-ite formula, so it self-fills hairline cracks and hides minor imperfections in one coat
  • Water-based emulsion means low odor and easy soap-and-water tool cleanup
  • Non-skid additive gives usable traction on the finished surface, unlike bare glossy coatings

Cons

  • Asphalt only - it will not bond to or protect concrete driveways
  • Needs a full clear, warm, dry weather window (roughly 50-90 F) and no rain for 24 hr, which is limiting in humid regions
  • Squeegee application is physically demanding and the black coating tracks onto shoes and tires if walked on too soon

Specifications

typePolymer-modified asphalt emulsion (water-based)
surfaceAsphalt / blacktop only
finishFlat black, non-skid
coverage300-500 sq ft per 4.75-gal pail per coat (surface dependent)
crackFillFills hairline cracks up to 1/8 in
cureTimeDry to touch in 4-8 hr; 24-48 hr before vehicle traffic
vocLow VOC, soap-and-water cleanup
warranty5-year

Frequently Asked Questions

How long does Latex-ite Airport Grade+ take to dry?
Dry to touch in 4-8 hours, but 24-48 hours before vehicle traffic. It also needs no rain for 24 hours and a temperature window of roughly 50-90F, which makes it genuinely weather-dependent in humid regions.
Will it fill cracks in the driveway?
Hairline cracks up to about 1/8 in, yes - it is the heaviest-bodied consumer Latex-ite formula, so it self-fills small cracks and hides minor imperfections in one coat. Anything wider than 1/8 in needs a dedicated crack filler first.
Can Latex-ite be used on concrete?
No. Like every asphalt emulsion in this class it bonds to asphalt and blacktop only and will not protect a concrete driveway.
How hard is it to apply?
Physically demanding. Squeegee application of a heavy-bodied sealer over a driveway is real work, and the black coating tracks onto shoes and tires if walked on too soon. On the plus side it is water-based with low odor and soap-and-water tool cleanup, has a non-skid additive for traction, covers 300-500 sq ft per 4.75-gallon pail per coat and carries a 5-year warranty.

Featured in these guides

Compare the Latex-ite Airport Grade+ Driveway Filler Sealer