Bona Hardwood Floor Polish (High Gloss) Review (2026)
By Nate Sawyer, Editor · Updated July 2026
DIYPicks is reader-supported. As an Amazon Associate and affiliate of home-improvement retailers, we may earn a commission when you buy through links on our site — at no extra cost to you. This never affects our recommendations.
- Restore shine
- Sealed hardwood
- Dull finish
A water-based urethane-acrylic polish that restores a bright, even shine to a dull but sealed wood floor and hides fine scratches, covering ~500 sq ft per 32 oz, walk-ready in about an hour and low-odor. It's cosmetic only, won't repair deep gouges, works only on sealed wood not waxed or oiled, and builds up over coats until stripped.
Pros
- Water-based urethane-acrylic restores a bright, even shine and hides fine scratches
- Covers about 500 sq ft per 32 oz bottle and is walk-ready in roughly an hour
- Greenguard-certified, low-odor and safe for polyurethane-finished wood
Cons
- Builds up over repeated coats and eventually must be stripped and reapplied
- Only for sealed/finished wood - not waxed, oiled, or unfinished floors
- Cosmetic shine only; it will not repair deep gouges or replace refinishing
Specifications
| Type | Water-based floor polish / restorer |
|---|---|
| For | Sealed/finished (polyurethane) wood |
| Finish | High gloss (satin version also sold) |
| Coverage | ~500 sq ft per 32 oz |
| Dry time | Walk-ready ~1 hr; cures ~24 hr |
| Best for | Restoring shine to a dull but sealed wood floor |
Frequently Asked Questions
- Will floor polish fix scratches?
- It hides fine scratches by filling and leveling the surface sheen, but it is cosmetic only — deep gouges and worn-through finish still need refinishing. Set expectations accordingly before buying.
- How often can you reapply Bona polish?
- It builds up over repeated coats and eventually has to be stripped and reapplied from scratch. That is the maintenance cycle to plan for rather than treating it as an indefinite top-up.
- How long before you can walk on it?
- Walk-ready in about an hour with full cure around 24 hours, and one 32 oz bottle covers roughly 500 sq ft. It is for sealed polyurethane floors only, not waxed, oiled or unfinished wood.