Behr Premium 1-Part Epoxy Concrete & Garage Floor Paint Review (2026)
By Nate Sawyer, Editor · Updated July 2026
DIYPicks is reader-supported. As an Amazon Associate and affiliate of home-improvement retailers, we may earn a commission when you buy through links on our site — at no extra cost to you. This never affects our recommendations.
- Budget garage floor refresh
- Self priming one coat paint
- Basements, porches and low traffic floors
A no-mix, self-priming 1-part epoxy paint that is the budget entry point for coating a garage floor. Best for basements, porches or a quick cosmetic refresh rather than a heavy-use two-car bay that sees daily hot tires.
Pros
- No mixing or pot-life clock: a single-component paint you brush and roll straight from the can
- Self-priming and low-cost, making it the cheapest way to freshen a dull slab
- Resists hot-tire pickup and automotive fluids better than ordinary porch paint
Cons
- Far thinner and less durable than any true 2-part epoxy or polyaspartic system
- Needs a full 7 days before vehicle traffic despite the light-duty formula
- Wears faster in high-traffic bays and may need recoating every few years
Specifications
| chemistry | 1-part water-based epoxy paint (self-priming) |
|---|---|
| coverage | 300-400 sq ft/gal rough, 400-500 sq ft/gal smooth |
| finish | satin |
| footTrafficReady | 24 hours |
| vehicleReady | 7 days |
| recoat | about 4-6 hours |
| cleanup | soap and water |
Frequently Asked Questions
- Is Behr 1-Part Epoxy the same as a real 2-part epoxy garage floor system?
- No, and the name causes a lot of confusion. This is a single-component water-based epoxy paint you brush and roll straight from the can with no mixing and no pot-life clock. It is far thinner and less durable than any true 2-part epoxy or polyaspartic system. It is the cheap refresh, not the permanent floor.
- How long before you can park on it?
- Foot traffic at 24 hours, but a full 7 days before vehicle traffic - despite it being the light-duty option. Recoat is about 4-6 hours. That 7-day wait surprises people who assumed the easier product would also be the faster one.
- How much floor does one gallon of Behr 1-Part Epoxy cover?
- 300-400 sq ft per gallon on rough concrete and 400-500 on smooth, and it is self-priming, so there is no separate primer purchase. At $48 a gallon that makes it the cheapest way to freshen a dull slab.
- How long will it actually last in a garage?
- Expect to recoat every few years in a working garage. It resists hot-tire pickup and automotive fluids better than ordinary porch paint, but it wears faster in high-traffic bays. For a basement, porch or a low-traffic floor it holds up considerably better.