BEHR PREMIUM Granite Grip Decorative Concrete Floor Coating Review (2026)
By Nate Sawyer, Editor · Updated July 2026
DIYPicks is reader-supported. As an Amazon Associate and affiliate of home-improvement retailers, we may earn a commission when you buy through links on our site — at no extra cost to you. This never affects our recommendations.
- Pool decks
- Patios
- Slip resistance
- Hiding hairline cracks
A tough, water-based acrylic coating whose speckled texture adds real underfoot grip on wet pool decks and patios while filling hairline cracks and resisting hot-tire pickup. The honest trade-off is coverage: at roughly 50 sq ft per gallon in two coats it eats product fast, and like any film coating it only lasts if you fully etch and clean the concrete first.
Pros
- Textured multi-speckle finish is genuinely slip-resistant when wet
- Fills hairline cracks and hides surface imperfections in the concrete
- Water cleanup and resists hot-tire pickup, grease and household stains
Cons
- Very low coverage (~50 sq ft/gal) means you buy and roll a lot of product
- Demands thorough etching/cleaning prep or it will peel from smooth concrete
- Limited stock color range and speckle look is not to everyone's taste
Specifications
| Type | Water-based acrylic, decorative multi-speckle |
|---|---|
| Coverage | ~40-50 sq ft/gal (rough), ~50-60 (smooth) at 2 coats |
| Finish/Texture | Speckled flat texture, grippy underfoot |
| Dry time | Recoat ~6 hrs; foot traffic ~24 hrs |
| Slip resistance | High — textured aggregate finish |
| Cleanup | Soap and water |
| Use | Horizontal exterior/interior concrete (pool decks, patios, garages) |
Frequently Asked Questions
- What are the common problems with BEHR Granite Grip?
- Three, and they are all predictable rather than random. Coverage is very low at roughly 40-50 sq ft per gallon on rough concrete over two coats, so you buy and roll far more product than a normal paint job. It demands thorough etching and cleaning or it will peel off smooth concrete. And the stock color range is limited, with a speckled look that not everyone wants.
- How much Granite Grip do you need for a patio or pool deck?
- Plan on roughly 40-50 sq ft per gallon on rough concrete and 50-60 on smooth, at two coats. Measure the slab and buy from that number rather than from a typical paint coverage figure, or you will run short mid-job.
- Is Granite Grip genuinely slip-resistant when wet?
- Yes. The textured multi-speckle aggregate finish gives real grip underfoot when wet, which is the main reason it gets chosen for pool decks and patios over a smooth concrete paint.
- Will it hide cracks in the concrete?
- It fills hairline cracks and hides general surface imperfections, which visually rescues a tired slab. It is a coating, not a repair - structural or moving cracks need proper crack repair first. It also resists hot-tire pickup, grease and household stains, and cleans up with soap and water.