ArmorPoxy ArmorClad 100% Solids Epoxy Garage Floor Kit Review (2026)
By Nate Sawyer, Editor · Updated July 2026
DIYPicks is reader-supported. As an Amazon Associate and affiliate of home-improvement retailers, we may earn a commission when you buy through links on our site — at no extra cost to you. This never affects our recommendations.
- Maximum thickness industrial grade floor
- Serious DIYers and pro level results
- Showroom quality flake floor
A 100% solids, no-shrink epoxy system with its own topcoat that delivers close to commercial-installer durability from a DIY kit. Worth the premium when you want the thickest, most chemical- and hot-tire-resistant floor and are willing to do a careful multi-coat job.
Pros
- 100% solids builds a thick, no-shrink film far tougher than water-based box-store kits
- Includes a separate high-gloss topcoat and power mixer for a genuine pro-grade result
- Industrial formula resists hot tires, chemicals and abrasion better than any other pick here
Cons
- Highest price per square foot of the group, especially for a small 300 sq ft kit
- Thick 100% solids epoxy sets fast and is demanding to spread evenly for beginners
- Full multi-coat flake-and-topcoat system takes the most labor and dry time to complete
Specifications
| chemistry | 2-part 100% solids epoxy (with polyurethane/UltraGlaze topcoat) |
|---|---|
| coverage | up to 300 sq ft per kit (also 600/900/1200 sq ft kits) |
| finish | high-gloss full flake with topcoat |
| solidsContent | 100% (no shrink on cure) |
| footTrafficReady | about 48 hours |
| fullCure | 7 days for full chemical resistance |
| kitIncludes | ArmorEtch, 100% solids epoxy, decorative flakes, power mixer, squeegee, roller, gloves, UltraGlaze topcoat |
Frequently Asked Questions
- What does 100% solids epoxy mean?
- Nothing evaporates as it cures, so the film does not shrink and ends up far thicker than a water-based box-store kit. That thickness is what delivers industrial-grade resistance to hot tires, chemicals and abrasion.
- Is this a realistic DIY project?
- For a serious DIYer, yes, but it is the most demanding option here. Thick 100% solids epoxy sets fast and is hard to spread evenly, and the full flake-and-topcoat system is a multi-coat, multi-day job.
- What is included and what does it cover?
- Up to 300 sq ft per kit, with larger 600/900/1200 sq ft kits available, plus a separate high-gloss UltraGlaze topcoat and a power mixer. Foot traffic at about 48 hours. It carries the highest price per square foot of the common options.